1981 VOLVO 242 Performance Parts

Results Per Page:

1-20 of 71 Results

1-20 of 71 Results
    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3.656 in (93 mm)
    • Thread Specification: 3/4" - 16 UNF-2B

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$36.04
    • Carrier Case
    • Dana 30/Reverse
    • Standard
    • 3.54 And Down Carrier Break
    • 1.810 in. Tall
    • Position: Front and Rear

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$221.34
    • Ring And Pinion Gear Set
    • Dana 30
    • 3.73 Ratio
    • Standard Rotation
    • w/o Crush Sleeve

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$504.41
    • Ring And Pinion Gear Set
    • Dana 30
    • Front Or Rear
    • 3.90 Ratio
    • w/o Crush Sleeve

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$494.15
    • Ring And Pinion Gear Set
    • Dana 30
    • 4.11 Ratio
    • Standard Rotation
    • w/o Crush Sleeve

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$418.77
    • Ring And Pinion Gear Set
    • Dana 30
    • 4.56 Ratio
    • Standard Rotation
    • w/o Crush Sleeve

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$384.52
    • Ring And Pinion Gear Set
    • Dana 30
    • 4.88 Ratio
    • Standard Rotation
    • w/o Crush Sleeve

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$418.77
    • Differential Bearing Kit
    • Dana 30
    • Front
    • Incl. Timken Carrier Bearings/Races
    • Pinion Bearings/Races/Pinion Seal/Crush Sleeve/Oil
    • Cover Bolts: 10
    • Ring Gear Bolts: 10
    • Pinion Spline Count: 26
    • Ring Gear Rotation: Standard
    • Cover Gasket Included: Yes
    • Pinion Shims Included: No
    • Carrier Shims Included: No
    • Crush Sleeve Included: No
    • Pinion Seal Included: Yes
    • Pinion Nut Included: Yes
    • Ring Gear Bolts Included: No
    • Head Bearing Included: Yes
    • Tail Bearing Included: Yes
    • Carrier Bearings Included: Yes
    • Axle Seals Included: No
    • Axle Bearings Included: No
    • Quantity: Sold as a kit

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$239.02
  1. Key Features:
    • B4 Series OE Replacement Shock Absorber

    Fitment:

    1981 VOLVO 242 DL, GL, GLT, Turbo / 2.1L L4 GAS

    C$100.06
    • UPC: 805890130628

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$125.98
  2. Key Features:
    • Front Left

    Fitment:

    1981 VOLVO 242 DL, GL, GLT, Turbo / 2.1L L4 GAS / With Vented Front Rotors

    C$214.98
    • UPC: 805890311201

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$66.98
    • UPC: 805890620006

    Fitment:

    1981 VOLVO 242 2.1L L4 GAS

    C$80.98
  3. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions.

    Fitment:

    1981 VOLVO 242 ALL / Rear Wheel Drive

    C$105.38
  4. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting.

    Fitment:

    1981 VOLVO 242 ALL / Front Wheel Drive

    C$138.23
    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Universal
    • Main Piping Diameter: 2"
    • Inlet Diameter: 2"
    • Outlet Diameter: 2"
    • Body Length: 9"
    • Body Width: 4.375"
    • Overall Length: 13"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Air Tube Adapter: Not Adaptable
    • O2 Sensor Location: N/A

    Fitment:

    1981 VOLVO 242 DL, GL, Turbo / 2.1L L4 GAS / 2.00" / 2.00"

    C$138.59
    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Universal
    • Main Piping Diameter: 2.25"
    • Inlet Diameter: 2.25"
    • Outlet Diameter: 2.25"
    • Body Length: 9"
    • Body Width: 4.375"
    • Overall Length: 13"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Air Tube Adapter: Not Adaptable
    • O2 Sensor Location: N/A

    Fitment:

    1981 VOLVO 242 DL, GL, GLT, Turbo / 2.1L L4 GAS / 2.25" / 2.25"

    C$138.59
  5. Whiteline Bushings are made from the highest quality materials, and guarantee to deliver superior functionality and durability. Whiteline steering products induce positive steering precision and feedback.

    Fitment:

    1981 VOLVO 242 DL, GL, GLT, Turbo

    C$67.98
  6. Centric Premium High-Carbon Brake Rotors are engineered with OE specifications and manufactured with OE production processes to meet all QS and ISO Quality System Standards. The rotors rely on their Electrocoating finish to deliver long lasting corrosion protection. Their special E-coating is a superior electro-statically applied finish which can withstand 400 hours of salt water exposure without any rusting. These High Carbon Rotors are available with advanced metallurgy which will greatly reduce the possibility of pad squeal. The proprietary Molybdenum and Chromium alloys will work to resist cracking in high heat temperatures and will increase friction couple for improved braking power and stopping performance.

    Fitment:

    1981 VOLVO 242 DL, GL, GLT, Turbo / 2.1L L4 GAS / With Vented Front Rotors

    C$179.98
    • UPC: 822903522973

    Fitment:

    1981 VOLVO 242 DL, GL, GLT, Turbo / 2.1L L4 GAS

    C$247.98
Results Per Page:

1-20 of 71 Results

1-20 of 71 Results