How to Efficiently Install a Borla Exhaust System

The highly acclaimed Borla Exhaust System is an incredibly effective means of taking the performance of your car, truck, or SUV to the next level. These innovative upgrades are built using top-quality components through advanced methodologies. They are well engineered to enhance exhaust flow for better engine breathability, resulting in elevated power and torque gains. These improvements are all coupled by an outstanding sound that’s sure to make your vehicle stand out.

When it comes to how to install a Borla exhaust, it is systematically designed to be integrated directly to the vehicle’s factory exhaust mounting locations. What’s more, this exhaust comes with all the necessary clamps and hardware. For different needs, these exceptional exhaust systems are made available in large varieties. In this article, we’ll further discuss how to properly incorporate the free-flowing Borla S-Type Exhaust System into a Ford F-150 truck. The S-Type system improves your vehicle’s aggressive personality while allowing you to manage with your normal spirited day-to-day driving.

So, what are the proper steps on how to install the Borla S-Type Exhaust System to your vehicle? Well, the initial step would be to make certain that you have the necessary tools for the job. You’re going to need a lift or jack and jack stands, a 3/8-inch drive ratchet, deep sockets, pry bar, and a spray lubricant. Next, you’re going to have to remove the original exhaust system to make way for the new one. To make removal more efficient, utilize a spray lubricant to the fasteners and allow a short amount of time for the chemicals to settle.

Liberally lubricate all the hangers and rubber isolators. The front flange bolts would be removed and kept for usage when mounting the new exhaust. The front muffler’s clamps are to be loosened so the whole assembly can be appropriately removed. With the exhaust system held up in place, take off the hangers from the rubber isolators so as to completely remove the remaining exhaust system.

Now that the older system is removed, it’s time to install your new Borla Exhaust System. The first thing you want to make sure is that you’re working on a flat surface for a safer and more efficient procedure. Appropriately connect the front pipe and muffler assembly using a 3-inch clamp. Place this assembly over the vehicle’s rear axle before placing the rubber hangers into the factory rubber isolators. Employ the proper hardware and suitably tighten this assembly.

Next, mount the hanger bracket assembly to both the driver’s and passenger’s side. The intermediate pipe and L/H tail pipe would need to be connected before being designated into the left side muffler assembly. Insert hangers into the rubber isolators. Do the same thing with the R/H tail pipe assembly and attach it to the right side muffler assembly. Make certain that the exhaust system has ideal clearance for the ground as well as proper tip alignment. Once determined to be correct, ideally fasten the Accuseal clamps to 32–35 ft. lbs.

Afterward, it’s now time to test if the installation process is complete. Before starting your vehicle’s engine, again make sure that the exhaust system has safe clearance from wires, tires, brake lines, and vehicle body parts. Start your vehicle and check for leaks. If there are leaks found, it could be due to an incorrectly mounted clamp. Adjust accordingly.

For the most easy-to-install Borla Exhaust Systems, there’s not a more reputable brand than TDot Performance. We carry brand new stocks of just about every kind of Borla Exhaust System. They are ready to be shipped to your place, and they come free of customs, duties, and brokerage fees. We are proud to offer the lowest prices in all of Canada. If there’s another certified brand that has better deals, we’re guaranteed to beat them. A retailer that’s verified and trustworthy, TDot Performance is the go-to name for progressive performance solutions.