Borla 60548 - 2.75" Stainless Steel X-Pipe

Part ##60548

Borla 60548 - 2.75" Stainless Steel X-Pipe

Part ##60548
C$549.99
Buy now and save C$110.00
C$659.99
Proudly Canadian
Free Shipping
No Border Fees
10000 Happy Customers
Lowest Price Guaranteed
Authorized Dealer

Product Info

The Borla Stainless Steel X-Pipes are crafted from T304 stainless steel for superior strength and maximum durability. It features a mandrel-bent pipe for low restriction, maximum flow, and power. Improved scavenging of spent exhaust gases is provided by the dual exhaust at the expense of low-end torque. You can allow both tailpipes to flow gases from any given cylinder to improve scavenging by adding a balance between the two halves of the exhaust system.

Borla X-Pipes will not only increase the amount of power that your vehicle produces, but also give your muscle, sports, or luxury car a more aggressive sound. The superiority of these X-Pipes comes at a cost because it is more tricky to fabricate than the H-pipe and is more difficult at times to fit under some vehicles. They perfectly complement Borla's Cat-Back and Header Systems.

Specs:

  • Tube Diameter: 2.75"
  • Material: Stainless Steel
  • Cut and Clamp. Retains catalytic converters.

Features:

  • T-304 stainless steel construction
  • Mandrel-bent for unobstructed air flow
  • Maximizes vehicle's performance

P65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer or other reproductive harm. Please visit www.p65warnings.ca.gov for more information.

Highly regarded for their outstanding performance exhausts, Borla Industries has been the go-to designer and manufacturer of custom vehicle builders all over the globe since 1979. Established by the creative minds of Alex and Alyse Borla, the company aims to provide users everything they need to maximize their vehicle's potential. Whether it's for off-road or race applications, Borla provides quality elements that when integrated to your system will significantly boost your vehicle's horsepower levels and enhance gas mileage. From exceptional cat back systems to progressive headers, the brilliant innovations by Borla are constructed using durable, aircraft quality stainless steel certifying an extensive lifespan. These components remove all hassles as they are methodically built to effortlessly create a precise fitment.

The company has established well developed facilities with the most knowledgeable engineers working hard on a daily basis to ensure the most modern and effective solutions are produced. Adding to that, Borla is a promoter of safe and responsible racing as their products are embedded with a superior technology that significantly boosts overall security. That's not all though, their products are guaranteed excellence as they are backed with a Million Mile warranty. For all the high quality parts needed by your custom system, look no further than the reliable and awe-inspiring designs by Borla.

Warranty Information

Borla Performance Industries, Inc. warrants its products to the original purchaser of record and for the original vehicle on which the product was installed against defects in materials and workmanship for one million miles with the following exceptions. BORLA will warranty BORLA catalytic converters, black tips and all moving parts, such as valves and actuators, for three years. This does not include blemishes or marring of appearance due to weather, road hazards, lack of maintenance or extremes of heat or cold. This warranty shall apply only if BORLA's examination of the returned product discloses a manufacturing or material defect, and BORLA's sole obligation under this warranty shall be limited to repair or replacement at BORLA's option. Note all attachment to universal mufflers must be made at the nipples; there should be no welding to the shell or end caps as this will void the warranty. No expressed or implied warranties of merchantability or fitness for a particular purpose are hereby made except as otherwise expressly provided herein. In no event shall BORLA PERFORMANCE INDUSTRIES, INC. or any BORLA Dealers or Distributors be liable for any loss, inconvenience or damage, whether direct, incidental, consequential or otherwise. Because sound is subjective, Borla does not provide warranty for sound.

This warranty does not include the cost of removal or reinstallation of the product, and does not apply if the product has been damaged by accident, abuse, misuse, or misapplication. This warranty is valid for BORLA street-legal products only and does not apply to any racing products or street products used for racing purposes. Any modifications to the product or its intended use voids the warranty. No person or representative is authorized to extend any warranties on behalf of BORLA, other than the warranty expressed herein. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion of limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and may have other rights which vary from state to state. This warranty replaces all previous warranties.

Brand:Borla
Part Number:60548
UPC:808422605489

Description

  • Tube Diameter: 2.75"
  • Material: Stainless Steel
  • Cut and Clamp. Retains catalytic converters.

Vehicle Fitment

Year Make Model Submodel Engine Size Body Style Transmission Type
2015 CHEVROLET CORVETTE STINGRAY, Z06 6.2L V8 GAS , Coupe (2 Door) , Manual Trans
2016 - 2017 CHEVROLET CORVETTE STINGRAY, Z06 6.2L V8 GAS , Coupe (2 Door) , Manual Trans
2018 CHEVROLET CORVETTE GRAND SPORT, STINGRAY, Z06 6.2L V8 GAS , Coupe (2 Door) , Manual Trans
2019 CHEVROLET CORVETTE GRAND SPORT, STINGRAY, Z06, ZR1 6.2L V8 GAS , Coupe (2 Door) , Manual Trans

Reviews

Write a Review

Submit a review for: Borla 60548 - 2.75" Stainless Steel X-Pipe

Rating: