Some car enthusiasts are not aware of the crucial importance of using hub centric rings when installing aftermarket wheels. On many cars, if aftermarket rims are mounted on the car without hub rings, it will only be supported by the lugs (called a lug centric mounting) giving rise to possible movement between wheel and hub during cornering and acceleration, vibration, and excessive wheel bearing wear, including possible structural failure of the lugs themselves which may lead to heavy repairs.
To provide the desired hub centric mounting of aftermarket wheels, hub centric rings are employed. The inner diameter of the hub centric ring is sized to just fit over the car's wheel hub (slip fit) while the outer diameter of the hub ring is sized to fit the wheels centerbore (slip fit or light push fit). So installed, hub centric rings enable the correct hub centric mounting of any aftermarket wheel. In other words wheel hub centric rings are designed to fill in the gap between the hub of the car and the center bore of the wheel for good fitment.
General Features of our Hub Centric Rings
- Brand new 4 piece set
- Material: Plastic
- These Rings do not rust!
You can find your inside Hub Centric Ring size by clicking on “Help Tips” and clicking on Bolt Pattern/Lug Nut Sizes. Your inner Hub centric ring size will be mentioned underneath the centre bore Colum. For outer size you can simply measure the outer diameter as shown in the product picture for best results. On the same page you can also find your Lug Nut size and bolt pattern before ordering rims!
Please Note: We do not guarantee fitment of hub centric rings for wheels we do not carry. If you order a set of rings and they do not fit, they are not returnable. Please be sure to measure everything carefully (in millimeters). If rings are ordered for wheels we do carry, we will double check fitment before shipping.
In order for us to double check the fitment, please email us with the following information: year, make, and model (and sub-model, if applicable) of your car and the O.D. size of the hub centric rings (if you know it). If you don't know the O.D. size or not sure that the size is correct, please make a note of the make, model and size of wheels to be installed. We will do our best to provide you with correct size of hub rings. Please note, however, that in the event we are unable to find proper size of the hub rings, we reserve the right to cancel the order.
|Year||Make||Model||Outer Diameter||Inner Diameter|
|ALL||ALL||ALL||70 mm||56.15 mm|