1955 MERCURY CUSTOM Performance Parts

Key Features:

• Deep-Dish Air Cleaner
• 6.5 in. Dia.
• High Riser
• H-2 7/8 in.
• 2-3-4 bbl Carburetors w/5 1/8 in. Dia. Neck
• Race Only

Key Features:

• Hilborn Style Air Scoop
• Aluminum
• 5 1/8 in. Dia. Carburetor Neck
• Single 4 bbl
• Race Only

Key Features:

• Exhaust Cut-Out
• Will Accept 2 in. OD Exhaust Pipe
• Incl. Control Cable
• Race Only

Key Features:

• Steel Braided Throttle Cable Kit
• Universal
• Incl. 36 in. Length Braided Cable/Clevis/Lock Nut/Firewall Bulkhead/Carb Pivot Pin

Key Features:

• Throttle Cable
• Braided Stainless Steel
• 36 in. Length
• Incl. Hardware

Key Features:

• Crankcase Evacuation System
• Incl. Two Valve Cover Breathers/Grommets/Check Valves/3.5 in. Long 45 deg. Cut-Threaded Tubes
• Race Only

Key Features:

• Wheel Dust Shields
• 14 in.
• Incl. Wheel Lugs

Key Features:

• Aluminum Carburetor Spacer Kit
• Phenolic
• Incl. Aluminum Spacer/2 Inserts
• Holley/Edelbrock/Carter/AFB 4-Hole/Open Hole Intakes/Center Hole/4 Hole Intake Manifolds

Key Features:

• Carburetor Bushing Kit
• Reduces 0.5 in. Dia. Throttle Hole To 1/4 in. ID
• For Use w/GM And Most Holley Carbs.

Key Features:

• Master Disconnect Switch
• Continuous Rating 20 Amps At 12V
• 40 Amps At 6V
• Momentary Rating 125 Amps At 12V
• 250 Amps At 6V

Key Features:

• Battery Installation Kit
• Incl. Battery Case/Hold-Down/All Hardware
• Holds Standard Batteries Up To 12 in. Long

Key Features:

• Exhaust Wrap
• 1 in.x 50 ft.
• 1/16 in. Thick

Key Features:

• Street Scoop Conversion Kit
• Aluminum
• Converts Dual 4 bbl To Single 4 bbl
• Incl. Mounting Flange/Throttle Linkage Rod/Carburetor Stud
• Race Only

Key Features:

• Shifter Bushing /Clip Kit
• 6 Bushings And Clips
• For Most 3/4 Speed Hurst Shifters

Key Features:

• Coil Spring Booster
• Front
• Rubber
• 1 in. Lift
• Front

Key Features:

• Shift Knob
• Universal
• 5 Speed
• White
• 3/8 in. - 16 UNC Thread

Whiteline Sway Bar Links With Heavy Duty Adjustable Steel Ball are made from the highest quality materials, and guarantee to deliver superior functionality and durability. Their heavy duty steel ball joint ends adjust and rotate to any angular combination. Whiteline sway bar products are specially engineered to improve sway bar effectiveness for more balanced and predictable cornering.

Whiteline Sway Bar Links With Heavy Duty Adjustable Steel Ball are made from the highest quality materials, and guarantee to deliver superior functionality and durability. Their heavy duty steel ball joint ends adjust and rotate to any angular combination. Whiteline sway bar products are specially engineered to improve sway bar effectiveness for more balanced and predictable cornering.

Whiteline Sway Bar - Alloy Lateral Lock 16mm ID Kit are high quality products guaranteeing superior functionality and efficiency. They are easy to install on car with no need to remove the sway bar to install. They are mounted directly next to the sway bar mounting points and prevent shifting or sideways movement of the sway bar under lateral loads.

KW Suspensions V1 Coil Over Kits are made from the highest quality materials, and guarantee to deliver superior functionality and efficiency. These products are engineered and pre-set from the factory for race-ready handling on your vehicle. With these kits you will be able to make micro-adjustments to the ride height at each wheel. Variant 1 Series allows full control over the height of each KW Coil Over Shock. Fitment Note: Volvo V40 / S40 (V) up to chassis # 495473.