1980 VOLKSWAGEN SCIROCCO Suspension Systems

Results Per Page:

1-20 of 57 Results

1-20 of 57 Results
  1. Key Features:
    • B8 Series SP Suspension Strut Cartridge
    • Dropped Height Depends On Lowering Spring Used

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S / 1.6L L4 GAS

    C$285.98
  2. KW Suspensions V3 Coil Over Kits are made from the highest quality materials, and guarantee to deliver superior functionality and efficiency. These products are engineered and pre-set from the factory for race-ready handling on your vehicle. With these kits you will be able to make micro-adjustments to the ride height at each wheel. KW Variant 3 Series Coil Overs open up complete control of your height, rebound and compression. Fitment Note: VW Golf I / Jetta I (155) Convertible.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S

    C$3,059.00
  3. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO ALL / Front Wheel Drive

    C$109.57
  4. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO ALL / Front Wheel Drive

    C$74.69
  5. KYB Jounce Bumper and Bellows are high quality products guaranteeing superior functionality and efficiency. They keep your struts protected from dirt, dust and sand. These products cause abrasive wear to the polished shaft, upper seal and bushing.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO ALL

    C$58.84
  6. Key Features:
    • B12 Series Pro Kit Lowering Kit
    • Front Up To 785kg Axle Load
    • Rear Up To 630kg Axle Load
    • Only For Use On Vehicles w/Rebuildable Struts

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S / 1.6L L4 GAS

    C$1,028.19
  7. Key Features:
    • B6 Series HD Shock Absorber
    • Supersedes PN[F4-B46-0837-H0]

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S

    C$196.05
  8. KW Suspensions V2 Coil Over Kits are made from the highest quality materials, and guarantee to deliver superior functionality and efficiency. These products are engineered and pre-set from the factory for race-ready handling on your vehicle. With these kits you will be able to make micro-adjustments to the ride height at each wheel. KW Variant 2 Series Coil Overs give you the ability to adjust height and rebound. Fitment Note: VW Golf I / Rabbit / Jetta I /Scirocco I+II; all engines; excl. Caddy.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S

    C$2,399.00
  9. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO ALL / Front Wheel Drive

    C$52.99
  10. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO ALL / Front Wheel Drive

    C$102.88
  11. KYB Jounce Bumper and Bellows are high quality products guaranteeing superior functionality and efficiency. They keep your struts protected from dirt, dust and sand. These products cause abrasive wear to the polished shaft, upper seal and bushing.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO ALL

    C$61.85
  12. KW Suspensions V1 Coil Over Kits are made from the highest quality materials, and guarantee to deliver superior functionality and efficiency. These products are engineered and pre-set from the factory for race-ready handling on your vehicle. With these kits you will be able to make micro-adjustments to the ride height at each wheel. Variant 1 Series allows full control over the height of each KW Coil Over Shock. Fitment Note: VW Golf I / Jetta I (155) Convertible.

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S

    C$1,749.00
  13. Key Features:
    • B4 Series OE Replacement Suspension Strut Cartridge

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S / 1.6L L4 GAS

    C$121.72
  14. Key Features:
    • B8 Series SP Shock Absorber
    • Supersedes PN[F4-B46-1514-H0/F4-B46-1514-H1]

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S / 1.6L L4 GAS

    C$192.43
  15. Key Features:
    • B4 Series OE Replacement Shock Absorber

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S / 1.6L L4 GAS

    C$116.25
  16. Key Features:
    • B6 Performance Suspension Strut Assembly

    Fitment:

    1980 VOLKSWAGEN SCIROCCO BASE, S / 1.6L L4 GAS

    C$433.71
    • Internal Design: Twin-tube
    • Gas Charged: Yes
    • Quantity: Sold individually.
    • Adjustable: Yes
    • Boot Included: No

    Fitment:

    1980 VOLKSWAGEN SCIROCCO

    C$317.02
    • Bolt Pattern: 4 x 100
    • Center Bore: 57
    • Thread Type: M12 x 1.5
    • Spacer: 5mm
    • Color: Silver

    Fitment:

    1980 VOLKSWAGEN SCIROCCO

    C$134.65
    • Notes: Heavy Track 'Red' Shocks
    • Adjustment: External Adjust via Knob
    • Position: Front
    • Quantity: Sold Individually

    Fitment:

    1980 VOLKSWAGEN SCIROCCO

    C$325.98
    • Notes: STR.T 'Orange' Shocks
    • Adjustment: Non-Adjustable
    • Position: Front
    • Quantity: Sold Individually

    Fitment:

    1980 VOLKSWAGEN SCIROCCO

    C$144.25
Results Per Page:

1-20 of 57 Results

1-20 of 57 Results