1982 VOLKSWAGEN RABBIT CONVERTIBLE Brands

  1. Key Features:
    • B8 Series SP Suspension Strut Cartridge
    • Dropped Height Depends On Lowering Spring Used

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$285.98
  2. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front
    • Performance Polyurethane

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$81.49
  3. Key Features:
    • Control Arm Bushing Set
    • Black
    • Rear
    • Performance Polyurethane

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$57.98
  4. Key Features:
    • Sway Bar Bushing Set
    • Red
    • Rear
    • Bar Dia. 21mm
    • Performance Polyurethane

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$55.98
  5. KW Suspensions V3 Coil Over Kits are made from the highest quality materials, and guarantee to deliver superior functionality and efficiency. These products are engineered and pre-set from the factory for race-ready handling on your vehicle. With these kits you will be able to make micro-adjustments to the ride height at each wheel. KW Variant 3 Series Coil Overs open up complete control of your height, rebound and compression. Fitment Note: VW Golf I / Jetta I (155) Convertible.

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4

    C$3,059.00
  6. McGard Lug Bolt Locks are easy-to-use, one-piece wheel locks manufactured from the highest quality materials. The collar holds the key in alignment for simple installation and removal. The computer generated key designs allow for an infinite number of key patterns. The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE

    C$87.98
    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3 in (76 mm)
    • Thread Specification: 3/4" - 16

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE 1.7L L4 GAS

    C$36.98
    • Position: Front
    • Rotor Construction: Vented 1-Piece
    • Rotor Style: Plain
    • Rotor Diameter: 9.4"
    • Quantity: Sold as a set

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$115.67
  7. Key Features:
    • Front Left

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$163.98
  8. Key Features:
    • Front Right

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$163.98
  9. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions.

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE ALL / Front Wheel Drive

    C$109.57
  10. KYB Jounce Bumper and Bellows are high quality products guaranteeing superior functionality and efficiency. They keep your struts protected from dirt, dust and sand. These products cause abrasive wear to the polished shaft, upper seal and bushing.

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE ALL

    C$58.84
  11. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting.

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE ALL / Front Wheel Drive

    C$74.69
  12. Key Features:
    • B6 Series HD Shock Absorber
    • Supersedes PN[F4-B46-0837-H0]

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$196.05
    • Opening Temperature Rating: 163 degrees F
    • Gaskets Included: Yes
    • Thermostat Material: Copper/Stainless steel
    • Quantity: Sold individually

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE

    C$93.20
  13. KW Suspensions V2 Coil Over Kits are made from the highest quality materials, and guarantee to deliver superior functionality and efficiency. These products are engineered and pre-set from the factory for race-ready handling on your vehicle. With these kits you will be able to make micro-adjustments to the ride height at each wheel. KW Variant 2 Series Coil Overs give you the ability to adjust height and rebound. Fitment Note: VW Golf I / Rabbit / Jetta I /Scirocco I+II; all engines; excl. Caddy.

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4

    C$2,399.00
  14. Russell Performance is a leading manufacturer of hoses, hose ends, fittings, and adapters you need, and provides a wide assortment of plumbing solutions with a variety of materials and finishes. You can find all Russell products here at a great price!

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE

    C$54.85
  15. Key Features:
    • Sway Bar Bushing Set
    • Red
    • Front
    • Bar Dia. 17mm
    • Incl. Sway Bar End Links/New Brackets
    • Performance Polyurethane

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$57.98
  16. Key Features:
    • Control Arm Bushing Set
    • Red
    • Front
    • Performance Polyurethane

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$81.98
    • Position: Front
    • Pad Material: Organic
    • Quantity: Sold as a set
    • FMSI: D158

    Fitment:

    1982 VOLKSWAGEN RABBIT CONVERTIBLE BASE / 1.7L L4 GAS

    C$142.24