2000 MAZDA B3000 Suspension Systems

Results Per Page:

1-20 of 88 Results

1-20 of 88 Results
  1. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    2000 MAZDA B3000 BASE, SE, SX, TROY LEE

    C$918.75
  2. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    2000 MAZDA B3000 BASE, SE, SX, TROY LEE

    C$732.20
  3. Key Features:
    • Leaf Spring Bushing Set
    • Black
    • Rear
    • Performance Polyurethane

    Fitment:

    2000 MAZDA B3000 SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS

    C$118.75
  4. Key Features:
    • Control Arm Bushing Set
    • Red
    • Front
    • Must Reuse All Hardware
    • Performance Polyurethane

    Fitment:

    2000 MAZDA B3000 SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS

    C$142.33
  5. Key Features:
    • Sway Bar Bushing Set
    • Black
    • Front
    • 29 MM
    • Performance Polyurethane

    Fitment:

    2000 MAZDA B3000 SE / 3.0L V6 FLEX, 3.0L V6 GAS / 4 Wheel Drive

    C$103.23
  6. Key Features:
    • Tie Rod Dust Boot
    • Red
    • Octagon Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    2000 MAZDA B3000 SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS

    C$35.98
    • Suspension Enhancement System
    • Weight Capacity 3000 lbs.
    • Rear

    Fitment:

    2000 MAZDA B3000 4 Wheel Drive

    C$294.09
  7. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures.

    Fitment:

    2000 MAZDA B3000 ALL / Rear Wheel Drive

    C$130.15
    • Series: RS7MT
    • Position: Rear Driver or Passenger
    • Quantity: Sold Individually
    • Color: Black
    • Compressed Length: 16.65"
    • Extended Length: 25.70"
    • Stroke Length: 9.05"
    • Body Length: 15.67"
    • Dust Shield: No
    • Extended Bumper Stop: Yes
    • Compressed Bumper Stop: No
    • Lower Mounting: L1
    • Upper Mounting: L1
    • Extended Hydraulic Lockout: No
    • Reserve Tube Diameter: 1.97"

    Fitment:

    2000 MAZDA B3000 3.0L V6 FLEX, 3.0L V6 GAS

    C$131.38
  8. Key Features:
    • Leaf Spring Bushing Set
    • Red
    • Rear
    • Performance Polyurethane

    Fitment:

    2000 MAZDA B3000 SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS

    C$113.01
  9. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    2000 MAZDA B3000 BASE, SE, SX, TROY LEE

    C$643.77
  10. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    2000 MAZDA B3000 BASE, SE, SX, TROY LEE

    C$491.99
  11. Key Features:
    • Sway Bar
    • Rear
    • 7/8 in. Bar Diameter.

    Fitment:

    2000 MAZDA B3000 BASE, SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS / 4 Wheel Drive, Rear Wheel Drive

    C$556.35
  12. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions.

    Fitment:

    2000 MAZDA B3000 ALL / Rear Wheel Drive

    C$106.67
  13. Key Features:
    • 4600 Series Shock Absorber

    Fitment:

    2000 MAZDA B3000 SE / 3.0L V6 FLEX / 4 Wheel Drive

    C$136.73
  14. Key Features:
    • 4600 Series Shock Absorber

    Fitment:

    2000 MAZDA B3000 SE / 3.0L V6 FLEX / 4 Wheel Drive

    C$140.11
    • Series: Shadow
    • Position: Front Driver Or Passenger Side
    • Upper Mount: Stem
    • Lower Mount: Bar Pin
    • Extended Length: 20.91"
    • Collapsed Length: 14.91"
    • Quantity: Sold Individually

    Fitment:

    2000 MAZDA B3000 3.0L V6 FLEX, 3.0L V6 GAS / 4 Wheel Drive

    C$123.99
  15. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front
    • Must Reuse All Hardware
    • Performance Polyurethane

    Fitment:

    2000 MAZDA B3000 SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS

    C$143.69
  16. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front
    • Must Reuse All Hardware For Upper Bushing
    • Performance Polyurethane

    Fitment:

    2000 MAZDA B3000 SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS

    C$143.69
  17. Key Features:
    • Tie Rod Dust Boot
    • Black
    • Round Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    2000 MAZDA B3000 BASE, SE, SX, TROY LEE / 3.0L V6 FLEX, 3.0L V6 GAS

    C$30.35
Results Per Page:

1-20 of 88 Results

1-20 of 88 Results