1989 FORD BRONCO Performance Parts

• MSD Direct Ignition System [DIS] Kit
• Conversion Kit
• Includes DIS Ignition Control Box/Pro-Billet Distributor With Blank Cap/Coils/Wiring Harnesses/Universal Wire Set/Hardware
• Red

• MSD Direct Ignition System [DIS] Kit
• Conversion Kit
• Includes DIS Ignition Control Box/Pro-Billet Distributor With Blank Cap/Coils/Wiring Harnesses/Universal Wire Set/Hardware
• Black

• Color: Red

Key Features:

• (2) Sway bar drop brackets and hardware

• Pro-Flo 4 Fuel Injection Kit
• w/Sequential Port Cyl. Heads
• 625 HP Max
• 35 lb/hr. Injectors
• Incl. 4150 Throttle Body/Wiring/Distributor/7 in. Tablet/All Nec. Parts/Hardware

Key Features:

• Front: Lifted coil springs, radius arm drop brackets, I-beam drop brackets, power steering pitman arm, and free single steering stabilizer
• Rear: 3-inch lift blocks and U-bolts
• Shocks: (4) Premium N2.0 Shocks
• If vehicle is equipped with a front sway-bar, drop brackets are required (#1018)
• Extended front brake lines are recommended (Front: #89310 Rear: #89330)
• Install Time(Hours): 6-8
• Wheel Backspacing (Inches): Factory
• Recommended Tire Size: 33-by-12.50

StopTech Street Pads are designed for daily driving and touring, combining high-performance braking with street-focused reliability and comfort. The Street Pads are low-dust, rotor-friendly pads featuring aggressive friction formulas for quiet operation and consistent braking at both cold and hot temperatures. Each pad is built to ensure precision OE fitment, and is lab- and dyno-tested for maximum performance and long service life. Upgrade your street braking power with the premium Street Pads developed by the one and only StopTech! StopTech Street Pads are designed for daily drivers looking for the best possible combination of pure stopping performance, low dust and low noise. These superior pads offer outstanding performance at extreme temps, ensuring top-tier functionality in any daily driving conditions. These pads are not only powerful at stopping but also very quiet, as their precision design and caliper fitment works to eliminate all noise caused by the usual pad vibration. You cannot go wrong with the StopTech Street Pads if you're looking for superior braking performance for your street driving needs. Order yours today!

Key Features:

• w/Hardware

Key Features:

• Custom Fit Spark Plug Wire Set
• Spiral Core
• Heavy Duty 8.8mm Oversized Silicone Jacket
• 150 ohms Per Foot Of Resistance
• Yellow
• Set

Key Features:

• Water Pump
• Aluminum - Black Finish
• High Flow
• .625 in. Pulley Pilot
• Reverse Rotation
• Limited 90 Day Warranty

Key Features:

• Starter
• Full Size
• Denso Style
• w/Adjustable Mounting Block
• Natural/Zinc Finish
• 2 Bolt

Key Features:

• Nitrous Holeshot 3800 Torque Converter
• 3800 RPM Stall
• 1.38 in. Crank Pilot

• Performance Distributor
• Stock Replacement
• High Dielectric Strength Cap w/Brass Terminals
• Incl. OE Style Ignition Module
• Cast Aluminum
• Polished

• Performance Head Gasket
• Composition Gasket Material
• 4.080 in. Gasket Bore
• .055 in. Compressed Thickness
• Sold Individually

Key Features:

• Street Warrior Intake Manifold
• Power Band To 5500 RPM
• Square Carb. Mounting Flange
• Low Rise/Dual Plane
• Non-EGR
• Satin Finish

• RS5000X Series Shock Absorber
• Extended Length: 22.280"
• Collapsed Length: 13.760"
• Stroke Length: 8.520"
• Position: Rear Driver Or Passenger Side
• Quantity: 1 per pack
• For Stock Height Vehicles

• Exhaust Header
• Header Style: Long Tube
• Primary Tube Diameter: 1.88"
• Collector Diameter: 3.00"
• Flange Thickness: 0.38"
• Material: Mild Steel

• Transmission Pan Gasket
• w/Aluminum Carrier
• Rubber Coated Sealing
• No Requires Silicone

• Distributor Shaft Diameter: 0.531 in.
• Distributor Gear Material: Steel
• Drilling Required: No
• Roll Pin Included: Yes
• Quantity: Sold individually