Free Shipping
Best Price Guarantee
30 Days No-Hassle Returns
1989 FORD BRONCO Brands
-
- Fastener Style: Bolt
- Undercut Stud: No
- Head Style: Hex
- Fastener Material: Chromoly
- Fastener Color: Black oxide
- Washers Included: Yes
- Washer Style: Flat
- Quantity: Sold as a kit
Fitment:
1989 FORD BRONCO 5.8L V8 GAS
C$183.60 -
- Max Fire Distributor
- Three Wire Hook-Up
- Centerless Ground Shaft
- High Output Magnetic Pickup
- Large Paddle Wheel Reluctor
Fitment:
1989 FORD BRONCO 5.0L V8 GAS
C$631.85 -
- Pro-Flo 4 Fuel Injection Kit
- 550 HP Max
- 29 lb/hr. Injectors
- Incl. 4150 Throttle Body/Wiring/Distributor/7 in. Tablet/All Nec. Parts/Hardware
Fitment:
1989 FORD BRONCO 5.0L V8 GAS
C$3,756.52 -
- Pro-Flo 4 Fuel Injection Kit
- w/Sequential Port Cyl. Heads
- 625 HP Max
- 35 lb/hr. Injectors
- Incl. 4150 Throttle Body/Wiring/Distributor/7 in. Tablet/All Nec. Parts/Hardware
Fitment:
1989 FORD BRONCO 5.8L V8 GAS
C$3,767.78 -
Key Features:- Front: Lifted coil springs, radius arm drop brackets, I-beam drop brackets, power steering pitman arm, and free single steering stabilizer
- Rear: 4-inch lift springs, 2-inch blocks, and U-bolts
- Shocks: (4) Premium N2.0 Shocks
- If vehicle is equipped with a front sway-bar, drop brackets are required (#1018)
- Extended front brake lines are recommended (Front: #89310 Rear: #89330)
- Install Time(Hours): 6-8
- Wheel Backspacing (Inches): Factory
- Recommended Tire Size: 35-by-12.50
Fitment:
1989 FORD BRONCO
C$1,410.95 -
Key Features:- Front extended brake lines
- DOT approved
- Braided stainless steel exterior
- Offers superior protection from off-road debris
- Pressure tested to 4000-PSI
- Recommended for models with 4-inch to 6-inch suspension lift kits
- Models with less than 4-inches of lift may have excess slack to keep away from pinch areas
- Install Time(Hours): 2-3
Fitment:
1989 FORD BRONCO
C$99.95 -
Wix Filters Fuel Filters are high quality products guaranteeing superior functionality and efficiency! They are specially designed to protect fuel system components from contaminants in the fuel. They are made of pleated papers to prevent leakage of the fuel under compression loads.Fitment:
1989 FORD BRONCO 4.9L L6, 5.0L V8, 5.8L V8
C$40.39 -
Key Features:- Load Controller II On-Board Air Compressor Control System
- Single Gauge
Fitment:
1989 FORD BRONCO CUSTOM, EDDIE BAUER, XLT
C$409.97 -
Key Features:- Load Controller
- Single
- Standard Duty
Fitment:
1989 FORD BRONCO CUSTOM, EDDIE BAUER, XLT
C$443.89 -
Dorman's Leaf Spring Shackle features strong, steel construction and is really enduring. It will surely serve you well for a very long time. Highest corrosion protection is also guaranteed, because the shackle and hardware are powder-coated. Dorman's Leaf Spring Shackle is available with all necessary components ? bolts, nuts, bushings and everything else you will need for the installation.Fitment:
1989 FORD BRONCO
C$141.10 -
Dorman's Leaf Spring Shackle features strong, steel construction and is really enduring. It will surely serve you well for a very long time. Highest corrosion protection is also guaranteed, because the shackle and hardware are powder-coated. Dorman's Leaf Spring Shackle is available with all necessary components ? bolts, nuts, bushings and everything else you will need for the installation.Fitment:
1989 FORD BRONCO
C$87.37 -
Key Features:- Holeshot 2600 Torque Converter
- 2400 - 2600 RPM Stall
- 1.38 in. Crank Pilot
Fitment:
1989 FORD BRONCO CUSTOM, EDDIE BAUER, XLT / 4.9L L6 GAS, 5.0L V8 GAS, 5.8L V8 GAS
C$774.67 -
Key Features:- RS5000X Series Shock Absorber
- Front Outer w/Factory Quad Suspension
Fitment:
1989 FORD BRONCO 4.9L L6 GAS, 5.0L V8 GAS, 5.8L V8 GAS
C$110.98 -
- Position: Front And Rear
- Quantity: Sold as Set
Fitment:
1989 FORD BRONCO 4.9L L6, 5.0L V8, 5.8L V8 / CUSTOM, EDDIE BAUER, XLT / SUV / 4 Wheel Drive
C$318.83 -
- Position: Front Driver Or Passenger Side
- Lower Mounting: Loop
- Upper Mounting: Pin
- Compressed Length: 9.50" (241.30 mm)
- Extended Length: 14.00" (355.60 mm)
- Bushing Inner Diameter: (Bottom)13.00 mm
- Bushing Width: (Bottom)38.00 mm
- Quantity: 1 per pack
Fitment:
1989 FORD BRONCO 4.9L L6, 5.0L V8, 5.8L V8 / CUSTOM, EDDIE BAUER, XLT / SUV / 4 Wheel Drive
C$110.17 -
- Position: Front Driver Or Passenger Side
- Lower Mounting: Loop
- Upper Mounting: Pin
- Compressed Length: 9.50" (241.30 mm)
- Extended Length: 14.00" (355.60 mm)
- Bushing Inner Diameter: (Bottom)13.00 mm
- Bushing Width: (Bottom)38.00 mm
- Quantity: 1 per pack
Fitment:
1989 FORD BRONCO 4.9L L6, 5.0L V8, 5.8L V8 / CUSTOM, EDDIE BAUER, XLT / SUV / 4 Wheel Drive
C$130.35 -
- Position: Front
- Rotor Construction: Vented
- Rotor Style: Slotted
- Rotor Diameter: 11.7"
- Quantity: Sold as a set
Fitment:
1989 FORD BRONCO CUSTOM, EDDIE BAUER, XLT / 4.9L L6 GAS, 5.0L V8 GAS, 5.8L V8 GAS
C$234.66 -
- Black
- 12 in.
- Rubber
- w/o Weight
- 2 pc.
Fitment:
1989 FORD BRONCO
C$92.54 -
- Exhaust Header Gasket
- Large Port Size 1.40 in. x 2.25 in. Rectangle
- Thickness 0.093 in.
- Ultra-Seal Material
Fitment:
1989 FORD BRONCO 5.0L V8 GAS, 5.8L V8 GAS
C$99.97 -
- Holley EFI Hi-Ram Intake Manifold
- With 105mm LS Throttle Body Flange Top
- 9.5 in. Deck
- 2.0x1.190 in. Port Size
- 1500-7000 RPM Power Band
- Black Finish
Fitment:
1989 FORD BRONCO 5.8L V8 GAS
C$1,414.97